Flat Face Carbide Cutters
Our flat face carbide cutters provide 100% removal of the surface material with little damage to the substrate. They feature almost three times more carbide than other standard cutters and were designed for pavement marking removal, including: paint, thermo-plastic, and epoxy. They are best used for removal applications that require a flat and even finish. They are offered in 6, 8, 12, and 16 point configurations.
 |
Dimensions Shown In Inches | ||||||
| RFQ | Item # | Points | OD | ID | Width | Details | ||
|
5 | 1.79" | 0.63" | 0.24" | MK® - SGII / SG5 / SG9 Bartell® - SP8 Von Arx® - VA25 -12mm Von Arx® - FR200 General® - SP8 Kut-Rite® - KR8 Sase® - SC8E |
||
|
6 | 1.79" | 0.63" | 0.24" | Edco® - CPM4 / CPM8Edger Edco® - CPM8 Edco® - CPL8 Edco® - CPM10 -1/2 MK® - SGII / SG5 / SG9 Von Arx® - VA25 -12mm Von Arx® - FR200 Smith® - SPS8 -1/2 |
||
|
8 | 1.79" | 0.63" | 0.24" | |||
|
8 | 2.3" | 0.63" | 0.24" | |||
|
8 | 2.3" | 0.79" | 0.24" | |||
|
8 | 2.3" | 0.98" | 0.24" | |||
|
8 | 3.13" | 1.03" | 0.31" | |||
|
8 | 3.13" | 1.19" | 0.31" | |||
|
12 | 3.13" | 1.03" | 0.31" | MRL® / Arrow® - Grinder Trucks |
||
|
12 | 3.13" | 1.19" | 0.31" | MRL® / Arrow® - Grinder Trucks |
||
|
16 | 3.13" | 1.03" | 0.31" | MRL® / Arrow® - Grinder Trucks |
||
|
16 | 3.13" | 1.19" | 0.31" | MRL® / Arrow® - Grinder Trucks |
||
